Demolition Breaker Manufacturer

Home - Products - Demolition Hammer Models - Demolition Breaker Models - GD-1500B Heavy Duty Industrial Demolition Jack Hammer

GD-1500B Heavy Duty Industrial Demolition Jack Hammer

Finishes come off in plates, not in dust, once the strike behind them reaches 45 J; tile beds, screed layers and soft brick all respond to that single blow. Our GD-1500B carries it on a 12.3 kg frame, and the 1500 W motor behind the piston keeps it cycling between blows, so the energy does not sag mid-wall. A HEX tool holder takes the point and flat chisels this trade already stocks. Slab-scale demolition still belongs to the heavier pistons; for wall chipping, floor coverings and soft masonry, this frame sits between the light hammer class and the two-hand heavy breakers.

 

Accessories

1.Hex Shank Flat 30*380mm 1pcs

2.Hex Shank Point 30*380mm 1pcs,                       

3.Spanner for oil tank cover: 1pcs 4.Grease 1pcs,5.Manual 1pcs  

Package 3.0KG Steel box

 

Model Parameters

Cable 3M Weight 12.3 kg
Input Power 1,500 W Impact Energy 45 J
Impact Rate 1900BPM Chisel Holder HEX

Product Features

45 J on a 1500 W draw

The strike does the separating: tile beds, screed and soft brick come away in plates rather than dust, and the 1500 W input keeps the piston cycle steady while the operator moves along the wall.

12.3 kg that travels by hand

One person carries the frame up a stairwell or hangs it on a scaffold bracket, and the same 12.3 kg settles the chisel into the surface, so thin layers take the blow without bouncing.

A HEX holder for the chisels the trade already stocks

Point chisels for breaking, flat chisels for scaling; the HEX interface accepts the shanks crews already own, so adding this machine does not strand the chisel rack on the wall.

Same blow, less ballast

GD-1400B carries the same single-blow energy on a 14.0 kg frame at 1400 W; this body holds 45 J at 12.3 kg and raises the draw to 1500 W, trading ballast for input.

Application Scenarios

Tile and screed stripping

Floor coverings bonded with mortar or adhesive beds lift in plates under the 45 J blow. The 12.3 kg frame lets the operator work across a room in one pass instead of dragging a heavy breaker from corner to corner.

Openings in soft brick and block

Window and door openings in non-load-bearing masonry start from chisel cuts at the corners. The single blow drives a point chisel through the joint, and the frame follows the cut line without shaking the surrounding wall.

Refurbishment chipping on upper floors

On upper-floor fit-outs, the weight of a breaker travels down the slab into the rooms below. This frame keeps the load inside the panel being removed, which is why refurbishment crews keep our breaker on the trolley.

Inquiry Now

Inquiry Now

We manufacture customized rotary & demolition hammers for global brands

*
*
*
*
verify

Related Products

Related FAQs

What is the Minimum Order Quantity (MOQ) for your products?

We offer flexible MOQs based on the product category: Light-duty Rotary Hammers: 500 pieces.Heavy-duty Rotary Hammers: 300 pieces.Demolition Hammers: 100 pieces. For initial trial orders or customized requirements, please contact our sales team for further discussion.

Do you provide samples before placing a bulk order?

Yes, we fully support sample testing. We believe that checking the performance and quality of our tools firsthand is essential for long-term partnership. Please reach out to us to arrange a sample shipment to your location.

What is the typical lead time for an order?

Our standard lead time is approximately 4-8 weeks after order confirmation and deposit receipt. This timeframe ensures that every tool undergoes our rigorous quality control and testing processes before shipment.

Do you support OEM and ODM services?

Absolutely. With over 20 years of manufacturing expertise, we offer comprehensive OEM and ODM solutions, including customized branding, color schemes, and packaging to help you build your own brand in the local market.

How do you ensure the quality of your power tools?

Quality is our core value. We maintain strict standards throughout the production chain—from raw material inspection to final performance testing. Our core components (like motors and gearboxes) are produced in-house to ensure high durability and reliability.

Cookie Settings

This website uses cookies to ensure you get the best experience on our industrial platform and to help us improve our services.