Pneumatic Pick Manufacturer

25+ years experience · CE / RoHS / EMC certified · In-house production

Home - Products - Pneumatic Pick Models - PB-37 Pneumatic Pick Professional Pavement Breaking

PB-37 Pneumatic Pick Professional Pavement Breaking

37 J per blow at up to 1,440 blows per minute—24 Hz of rapid, sustained striking—makes the PB-37 a paving breaker built for roadwork, not heavy foundation demolition. Its 50.8 × 125 mm piston sweeps 253.3 cm³ per stroke, delivering a fast rhythm that clears asphalt and concrete pavement quickly while the 30 kg body provides the downforce to keep the tool planted.

That combination sets it apart from heavier picks in the range: the G30 delivers 55 J per blow at 960 bpm for breaking thick foundations, while the PB-37 runs 480 bpm faster at 37 J per blow—a cadence tuned for pavement, trenching and urban demolition where speed matters more than raw single-blow force.

Choose it when the job is roads, streets and paved surfaces—where fast, sustained breaking keeps the crew on schedule .

Model Parameters

Type of Power

Pneumatic

Impact Rate

1,440 bpm

Shank Size

Hex 32 × 152 mm

Weight

30.0 kg

Air Pressure

0.63 MPa

Impact Energy

≥37 J

Overall Length

615 mm

Air Consumption

≤42 L/S

Piston Dia

50.8 mm

Piston Stroke

125 mm

Hose Size

23 mm

Noise Level

≤125 dB(A)

Product Features

1,440 BPM: a fast breaking rhythm for pavement work

PB-37 clears asphalt and concrete surfaces quickly. This is a high-frequency rhythm tuned for roadwork—fast strikes that break pavement and move on, rather than heavy blows that sit on one spot.

37 J per blow: enough force for pavement and slabs

The PB-37 breaks asphalt, concrete pavement and slab-on-grade removal without hesitation. The energy is sized for road surfaces and utility work—enough to break through, without the weight and air demand of a full demolition pick.

Stable 30 kg body for road and trench work

The PB-37 provides the downforce and control needed for road breaking, trenching and urban demolition. The weight keeps the tool planted on horizontal surfaces, so the operator can guide the break instead of fighting the machine.

Hex 32 × 152 mm shank: the paving standard

The PB-37 uses a hex 32 × 152 mm shank—a heavy-duty standard for paving breakers—ensuring secure tool retention and compatibility with widely available breaking steels. Crews can source steel locally and switch between point, chisel and asphalt cutters.

Application Scenarios

Road and pavement breaking

With its fast rhythm and solid downforce, the PB-37 is built for breaking asphalt roads, concrete pavement and street surfaces in maintenance and rehabilitation work. The 1,440 bpm cadence keeps the break moving—lane by lane, patch by patch—so crews finish faster and reopen traffic sooner.

Utility trenching

The PB-37 opens utility trenches in paved surfaces quickly and cleanly, a practical tool for water, gas and electrical crews working in urban environments. The 30 kg body gives the control needed for straight, accurate trench lines in asphalt and concrete.

Slab and foundation removal

With 37 J of impact energy, the PB-37 handles concrete slab removal, foundation breaking and small demolition tasks on construction sites. It brings paving-breaker speed to light demolition work—without the weight and air demand of a full heavy pick.

Inquiry Now

Inquiry Now

We manufacture customized rotary & demolition hammers for global brands

*
*
*
*
verify

Related Products

Related FAQs

What is the Minimum Order Quantity (MOQ) for your products?

We offer flexible MOQs based on the product category: Light-duty Rotary Hammers: 500 pieces.Heavy-duty Rotary Hammers: 300 pieces.Demolition Hammers: 100 pieces. For initial trial orders or customized requirements, please contact our sales team for further discussion.

Do you provide samples before placing a bulk order?

Yes, we fully support sample testing. We believe that checking the performance and quality of our tools firsthand is essential for long-term partnership. Please reach out to us to arrange a sample shipment to your location.

What is the typical lead time for an order?

Our standard lead time is approximately 4-8 weeks after order confirmation and deposit receipt. This timeframe ensures that every tool undergoes our rigorous quality control and testing processes before shipment.

Do you support OEM and ODM services?

Absolutely. With over 20 years of manufacturing expertise, we offer comprehensive OEM and ODM solutions, including customized branding, color schemes, and packaging to help you build your own brand in the local market.

How do you ensure the quality of your power tools?

Quality is our core value. We maintain strict standards throughout the production chain—from raw material inspection to final performance testing. Our core components (like motors and gearboxes) are produced in-house to ensure high durability and reliability.

Cookie Settings

This website uses cookies to ensure you get the best experience on our industrial platform and to help us improve our services.